Levo Exports
Return to main site Return to main site
Home   About Plant & Machinery   Projects   Contact us
 
Agro Machines Biscuit Making Machines Construction Machines Expeller
Flexo Printing Machines Packing System Machines Saw Machines Soap Making Machines
Notebook Making Machines Weighing Machines Welding & Invertor System
Soap Making Machine
Sigma Mixer
Soap Making Machine
Special features :
Mixing Chamber Size :- 600mm X  600mm ( 24" X 24")
Power requirement :-    7.5 HP,  415V 50 Hz, 1440 RPM
Gear Box :-     Worm and Worm wheel type
No of Shaft :-  Twin Shaft ( SS Cast  Z shaped )
Gear :- Cast Iron Gear and steel cast pinion. Enclosed in a oil chamber.
Bearings :-     Self aligning bearings
Material of Cons.:-     Inside lined with stainless steel and rest structure of mild steel
Discharge Mechanism:-   Bottom Discharge
 
Triple Roller Mill Request Details Request Details Top Top
Soap Making Machine
Special features :
No. of Rolls :-         Three
Size of Rolls :-        150 mm ± 2 mm ( 6")
Length of Rolls :- 400 mm  ± 2 mm (16”)
Power required :- 7.5 HP, 415V 50 Hz, 1440 RPM
Gear Box :-  Worm and Worm Wheel Type
Bearings :- Self Aligning Bearings
Material of Rolls :-  Chilled Cast Iron
Gears :- All Mild Steel  Gears. Enclosed in a oil chamber
Ribbon  Scrapper :- Sprig loaded carbon steel blades.
Material of Construction :-     Stainless steel on contact parts and mild steel for other structural parts.
 
Stamping Machine Request Details Request Details Top Top
Soap Making Machine
Special features :
Type:- Foot Operated with counter balance weight and seating arrangement for operator.
Dies :- Stainless steel with Brass Casings for banded soap and for other soaps depending upon the shape.
 
Duplex Vacuum Poldder Request Details Request Details Top Top
Soap Making Machine
Special features :
Size of Top Plodder :-  150 mm± 5 mm( 6")
Size of  Bottom Plodder :-      150 mm± 5 mm( 6")
Power Req. for Top Plodder :-  7.5 HP, 415V 50 Hz, 1440 RPM
Gear Box for Top Plodder :- Worm and Worm Wheel Type
Power Req. for Bottom Plodder :- 7.5 HP, 415V 50 Hz, 1440 RPM
Gear Box for Bottom Plodder:- Worm and Worm Wheel Type
Bearing  for Pedestal :- Taper Roller Bearings
Material of Screw :- Aluminum Silicon Alloy
Material of other contact parts :- Stainless Steel at contact parts and rest structure of mild steel
Vacuum Chamber :- Stainless Steel Cast covers and chamber of stainless steel sheets
Vacuum Pump : 3HP, 415V 50Hz, 2800 RPM
Heating Arrangement :-
Heating and Thermostat mechanism to control the temperature of the extruding bar.
Power req. for Heating arrang. :- 3HP, 230V , single phase
Rotary Cutter :-  
Material of Construction :- Aluminum Rolls for holding the rotary knife
Approx.  length of bar Cut :- 400mm (16")
Cake Cutting and Embossing :-  
Strokes per Minute :- 15 to 16
Maximum length of bar cut :- 400mm(16")
Power Requirement :- 0.5HP, 415V 50Hz, 1440 RPM
Material of other contact parts :- Stainless Steel at contact parts and rest structure of mild steel
 
Developed by: Levo Technologies Pvt. Ltd.